Chapter 3 BIOS Description
Typematic Delay (Msec) (Default: 250)
Use this option to define how many milliseconds must elapse before a held- down key beings generating repeat characters.
Security Option (Default: Setup)
When it is set to “Setup”, a password is required to enter the CMOS Setup screen; When it is set to “System”, a password is required not only to enter CMOS Setup, but also to start up your PC.
APIC Mode (Default: Enabled)
This option is used to enable or disable APIC mode. The available setting values are: Disabled and Enabled.
MPS Version Control For OS (Default: 1.4)
This option is used to set up the version of MPS Table used in NT4.0 OS.
OS Select For DRAM > 64MB (Default: Non-OS2)
This option is only required if you have installed more than 64 MB of memory and you are running the OS/2 operating system. Otherwise, leave this option at the default.
HDD S.M.A.R.T Capability (Default: Disabled)
This option is used to enable or disable hard disk S.M.A.R.T. support function. The available setting values are: Disabled and Enabled.
Report No FDD For WIN 95 (Default: No)
If you are using the Windows 95 and running a system with on floppy drive, select ”Yes” for this option to ensure compatibility with Windows 95 logo certification. The available setting values are: No and Yes.
Video BIOS Shadow (Default: Enabled)
This option is used to enable or disable Video BIOS Shadow. If you enable this option, the video BIOS will be copied to RAM. Video shadow will increase the video speed. The available setting values are: Disabled and Enabled.
Small Logo (EPA) Show (Default: Enabled)
This option allows you to enable or disable the EPA logo. The available setting values are: Disabled and Enabled.
| 41 | |
661M03 Series User Manual | ||
|
