Foxconn 661M03 user manual Header F1394 optional, Wake-Up On LAN WOL

Chapter 2 Installation Instructions

1394 Header: F_1394 (optional)

The 1394 expansion cable can be connected to either the front (provided that the front panel of your chassis is equipped with the appropriate interface) or real panel of the chassis.

Empty B +			A +
	VCC	GND
				1
	VCC	GND

GND B - A -

F_1394

Wake-Up On LAN: WOL

Through the Wake-Up On LAN function, a wake event occurring from the net- work can wake up the system. To utilize this function, please be sure an ATX 12V power supply with a 5VSB line capable of delivering a current of at least 720mA, and a LAN adapter which supports this function. Then connect the header to the relevant connector on the LAN adapter, set “MACPME Power Up Control” and “PCIPME Power Up Control” to enabled in the “POWER MANAGEMENT SETUP” section of the CMOS SETUP. Save and exit, then boot the operating system once to make sure this function takes effect.

1

LAN wake up

GND 5V SB

WOL

24 661M03 Series User Manual