Foxconn 661M03 user manual Attaching Speakers, Channel Analog Audio Output

Chapter 4 Driver CD Introduction

	Click here	Click here
1		2

Click here

3

Attaching Speakers

To perform multichannel audio operation, connect multiple speakers to the system. You should connect the same number of speakers as the audio chan- nels you will select in the software utility.

2-Channel Analog Audio Output

The audio connectors on the rear panel already provide 2-Channel analog au- dio output. The rear panel’s audio connectors can be transformed to 4-/6-Chan- nel analog audio connectors automatically when you select the correct setting in the software utility. For information about the setting, refer to Selecting 4- or 6- Channel setting later in this section.

Make sure all speakers are connected to Line-out connectors. Diverse connec- tor configurations for 2-, 4- and 6-Channel using rear panel connectors are described below:

66 661M03 Series User Manual