79
MAINTENANCE page
It is possible to update the firmware of the decoder or
restart the decoder.
■Item Descriptions
FIRMWARE UPDATE
Update the firmware of the decoder by executing the
update files sent to the decoder in advance.
Refer to the following for more information about the
firmware update.
RESTART
Click the [RESTART] button to restart the decoder. It
will take around 2 minutes for the decoder to become
operable after the [RESTART] button is clicked.
During restart, it is impossible to operate the
decoder.

HOW TO UPDATE THE FIRMWARE

It is possible to update to the firmware of the decoder.
1. Acquire the file for update and copy it into the
desired directory on the PC.
2. Transfer the file from the PC to the decoder.
Follow the procedure below to transfer using the MS-
DOS command.
1. Start up the DOS prompt.
• Except Windows XP
[Start] – [Programs] – [Accessories] – [MS-DOS
prompt]
•In case of Windows XP
[Start] – [Programs] – [Accessories] – [Command
prompt]
2. Connect to the decoder to be updated using the
"ftp" command.
Example: c: \ftp 192.168.0.11
3. Enter a user name with the access level 1
(ADMINISTRATOR) and the respective password
when authentication is required.
4. Enter the "bin" command to change to the binary
mode.
5. Transfer the file for update to the decoder using
the "put" command.
Example: put (name of the file to be transferred)
6. Confirm the file has been transferred by checking
the file name using the "ls" command.
3. Click the [START] button to update the firmware on
the MAINTENANCE page.
4. Click the [RESTART] button to restart the decoder.