68
SETTINGS MENUS OF THE DECODER
CONTROL/STATE page
Note: It is impossible to switch streaming video when
using the unicast transmission.
■Item Descriptions
CH
Numbers of the VIDEO OUT 1 - 4 connectors of the
decoder
RECEIVING STREAM IP ADDRESS/RECEIVING
STREAM PORT No.
Displaying the respective receiving stream IP
addresses and receiving stream port numbers
The decoder will receive streaming video and audio
data of the entered IP address (of the camera) sent
from the encoder, and will display it on the monitor
connected to the decoder.
It is possible to switch the received stream by
clicking the [START] button after entering the IP
address or the port number directly to the
"RECEIVING STREAM IP ADDRESS" or
"RECEIVING STREAM PORT No." input box
respectively.
DECODE STATE
PLAY: Displayed while receiving streaming
STOP: Displayed when receiving stream has
stopped
The decoding status can be checked by the STATUS
indicators on the front panel of the decoder. (Refer to
page 13.)
CONTROL
[START] button: Click this button to start decoding
when the "DECODE STATE" is "STOP".
[STOP] button: Click this button to stop decoding
when the "DECODE STATE" is "PLAY".
[UPDATE] button
Click this button to update the settings changed on
the CONTROL/STATE page.