Symptom

The image is not displayed while the STATUS 1 - 4 indicators of the encoder are lit and the STATUS 1 - 4 indicators of the decoder are blinking.

Possible cause / Possible solution

•Are "RECEIVING IP ADDRESS" and "RECEIVING PORT No." of the decoder set correctly to receive streaming video and audio data?

Check "DESTINATION IP ADDRESS" and "DESTINATION PORT No." on the VIDEO page of the encoder, and set the same values for "RECEIVING IP ADDRESS" and "RECEIVING PORT No." of the decoder.

To confirm temporarily, click the [START] button after entering a value on the CONTROL/STATE page of the decoder.

Reference page

44, 68, 69

The STAUS 1 - 4 indicators of the encoder are not lit.

The image is not displayed while the STATUS 1 - 4 indicators of the decoder are not lit.

The image is not displayed while the STATUS 1 - 4 indicators of the both the encoder and decoder are lit.

The image is not displayed correctly.

• The encoder may be down.

 

Check the status of the encoder on the CONTROL/STATE

43

page. When the status is "STOP", click the [START] button.

 

 

 

•The decoder may be down.

Check the status of the decoder on the CONTROL/

STATE page. When the status is "STOP", click the

68

 

[START] button.

 

•Is the monitor connected correctly?

Confirm that the monitor is connected to the VIDEO OUT

connector of the decoder.

15

 

• Are there noise influences caused by power grounding,

 

case grounding or cable shield wear?

 

When not using groundings or shielded cables (STP

–

cable, etc.), noise influences may easily occur.

 

Use groundings or shielded cables.

 

 

 

•Is the encoder/decoder installed in a place subject to high-frequency noise?

When installed near fluorescent lamps, a transfor-

mer or a CRT monitor, it may have influences by

–

 

high-frequency noise. In this case, install the

 

encoder/decoder away from such devices.

 

•Are the cables connected to the encoder/decoder wired along with high-voltage power cables, etc.?

When the cables are wired within 10 cm from high-voltage

–

power cables, etc., there might be noise influences.

 

Wire the cables more than 10 cm away from high-voltage

 

power cables, etc. or wire them separately.

 

83

Page 82 Page 84
Page 83
Image 83
Panasonic WJ-GXD900, WJ-GXE900 manual Image is not displayed correctly, Encoder may be down
Page 82 Page 84

WJ-GXD900, WJ-GXE900 specifications

The Panasonic WJ-GXE900 and WJ-GXD900 are top-tier video encoders designed to meet the increasing demands of surveillance applications. These devices are essential in providing high-quality video transmission over IP networks, making them ideal for both security and monitoring purposes.

One of the standout features of the WJ-GXE900 is its advanced encoding capability. It supports H.265 and H.264 compression standards, allowing for efficient bandwidth usage without compromising video quality. This technology is particularly beneficial for environments where bandwidth might be limited, as it significantly reduces the data load while maintaining impressive clarity, even in challenging lighting conditions.

The WJ-GXD900, on the other hand, is designed for high-definition video encoding. It also utilizes H.265 and H.264 technologies, but offers enhanced image processing capabilities. This includes advanced noise reduction, which helps to produce clearer images during low-light situations. Both models utilize 4K resolution support, allowing users to capture ultra-high-definition video, which is crucial for applications requiring detailed surveillance footage.

Another key characteristic of both models is their versatility in integration with IP cameras and other devices. They are compatible with a wide range of Panasonic and third-party IP cameras, ensuring that users can build a surveillance system tailored to their specific needs. This interoperability is vital for large installations where multiple camera types might be used.

The WJ-GXE900 and WJ-GXD900 also feature intuitive web-based interfaces, simplifying the setup and configuration processes. Users can easily manage settings, stream video, and monitor performance remotely from any device with internet access. This remote management capability is increasingly important in today's fast-paced environments, where quick responses and monitoring are critical.

Additionally, both models support multiple streaming options, including the ability to deliver video to various destinations simultaneously. This feature is particularly useful for organizations needing to distribute video feeds to multiple monitors or devices, enhancing real-time surveillance capabilities.

In conclusion, the Panasonic WJ-GXE900 and WJ-GXD900 are powerful video encoders that combine advanced technology with user-friendly features. Their support for high-quality video encoding, integration flexibility, and remote management capabilities make them excellent choices for any modern surveillance system. These devices exemplify Panasonic's commitment to innovation, reliability, and high-performance solutions in the realm of security technology.
Top Page Image Contents