Panasonic WJ-GXD900, WJ-GXE900 MULTISCREEN DISPLAY

107

MULTISCREEN DISPLAY

Designates image to be displayed on the monitor connected to the QUAD connector by the CGI commands. It is

possible to select whether to display in multiscreen (quad) or to display one of the 4 image sources.

■Format

■Response

■Important Notice

•"video=out & ch=(parameter value)" (Required)

■Control Item List

Item Parameter name Parameter value Description

Multiscreen video out Identifier to display multichannel

VIDEO OUT channel ch 01 - 05 Select one of the VIDEO OUT channel

numbers, or select 05 to display 4 images

in a multiscreen (QUAD).

■Examples

1. To display the images in a multiscreen

http://192.168.0.11/control4?video=out&ch=05

2. To display the image from VIDEO OUT channel 1

http://192.168.0.11/control4?video=out&ch=01

HTTP /1.1 200 OK CR

LF

Cache-Control: no-cache CR

LF

Content-Type: text/plain CR

LF

Content-Length: XX CR

LF (XX: Display the octet number of the Message-Body decimally)

CR

LF

OK or NG

http://(IP address of the decoder)/control4?video=out&ch=(parameter value)

Contents

Main MPEG2 Encoder Model No. WJ-GXE900 MPEG2 Decoder Operating Instructions WJ-GXE900 WJ-GXD900 CAUTION ENGLISH VERSION IMPORTANT SAFETY INSTRUCTIONS CONTENTS Page FEATURES Page PRECAUTIONS SYSTEM REQUIREMENTS LIMITATION OF LIABILITY TRADEMARKS AND REGISTERED TRADEMARKS DOCUMENT CONVENTION CAUTIONS ABOUT THE NETWORK ENVIRONMENT MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS MPEG2 Encoder Front Panel qwert Page MAJOR OPERATING CONTROLS AND THEIR FUNCTIONSMAJOR OPERATING CONTROLS AND THEIR FUNCTIONS i qwert y u o! 0 ! MPEG2 Decoder Front Panel q we rty u MAJOR OPERATING CONTROLS AND THEIR FUNCTIONSMAJOR OPERATING CONTROLS AND THEIR FUNCTIONS MPEG2 Decoder Rear Panel wqertyu i Multicast Transmission CONNECTIONS When monitoring pictures of a camera with two or more monitors System Example (Switching streaming video) Operation Example (Switching streaming video) Switching currently monitored streaming video to another streaming video Controlling camera System example (Recording streaming video) This is a system example to control the digital disk recorder (WJ-HD500) from a PC. Digital Disk Recorder WJ-HD500 Series Setting Example (Recording streaming video) Operation Example (Recording streaming video) Unicast Transmission System Example Receiving and Sending Serial Data (RS-485) Network Required Settings for RS-485 Alarm Function and a Reset Switch System Example TRIGGER OUT ALARM IN RESET ALARM IN Alarms Action of the encoder when an alarm is received Alarm notification command Alarm Reset AUDIO IN/AUDIO OUT INSTALLATIONS Places to avoid About mounting Heat Dissipation INSTALLATIONSINSTALLATIONS Rack Mounting Mounting the decoder Mounting the encoder INSTALLATIONSINSTALLATIONS Installing in a container box (Only for the Encoder) How to install Warning when installing the encoder in a container box To reduce the risk of fire or malfunction, observe the following instructions. Description Labels Labels for Encoder Labels for Decoder How to Display the Settings Menus Before Starting Settings Setup with the Provided "Panasonic IP Setup"Software Page Network Setup of the PC Using Windows 98 SE Page Using Windows 2000 Page Using Windows XP (Category View) Page Page SETTINGS MENUS OF THE ENCODERSETTINGS MENUS OF THE ENCODER CONTROL/STATE page (page 43) VIDEO page (for each video input channel) (page 44) AUDIO page (page 46) ALARM page (page 47) CONTROL/STATE page VIDEO page Page AUDIO page ALARM page ALARM SETUP ALARM NOTIFICATION IPADDRESS/ALARM NOTIFICATION PORT No. ALARM-DRY CONTACT page Page ALARM-CAMERA SITE page Page ALARM-VIDEO LOSS page Page RS-485 DATA PORT page RS-485 DATAPORT SETUP NETWORK PORT SETUP NETWORK page SYSTEM page DEVICE NAME/LOCATION/CONTACT/ SNMP COMMUNITY MAIN CPU MODE SETUP USER page USER AUTHENTICATION HOST page HOST AUTHENTICATION EXCLUSIVE COMMAND AUTHENTICA- TION SETUP MAINTENANCE page HOW TO UPDATE THE FIRMWARE CAMERA CONTROL page Page CAMERA MENU CONTROL page B A Page List of the Items on the Settings Pages of the Decoder CONTROL/STATE page (page 68) VIDEO page (for each video output chan- nel) (page 69) DISPLAYpage (page 71) NETWORK page (page 73) CONTROL/STATE page VIDEO page Page DISPLAY page Page NETWORK page SYSTEM page DEVICE NAME/ LOCATION/CONTACT/ SNMP COMMUNITY MAIN CPU MODE SETUP USER page USER AUTHENTICATION HOST page HOST AUTHENTICATION Page MAINTENANCE page HOW TO UPDATE THE FIRMWARE TROUBLESHOOTING Before asking for repairs, please check the following symptoms. Page Page Page Page Page CAMERA CONTROL Page CAMERA SETTINGS MENUS CONTROL Page SWITCHING STREAMING VIDEO Page CONTROLLING START /STOP OF THE ENCODER Start encoding (Streaming transmission) Stop encoding (Stop streaming transmission) Start encoding Stop encoding Page CONTROLLING START / STOP OF THE DECODER Start decoding (Streaming transmission) Stop decoding (Stop streaming transmission) Start decoding Stop decoding DISPLAYING THE STATUS OF THE ENCODER Displays the status of the encoder. Page DISPLAYING THE STATUS OF THE DECODER Displays the status of the decoder. Page CONTROLLING THE BIT RATE OF STREAMING VIDEO AND AUDIO DATA Page RESETTING THE ALARM / DISPLAYING THE ALARM STATUS Alarm reset Alarm status display Response of alarm reset Response of displaying alarm status DISPLAYING THE CONTACT INPUT STATUS Displays the status of each contact input port. DISPLAYING THE STATUS OF VIDEO LOSS MUTING THE AUDIO MULTISCREEN DISPLAY CONTROLLING THE CONTACT OUTPUT Page RESTARTING THE ENCODER / DECODER It is possible to restart the encoder/decoder using the CGI commands. Restarting the encoder Restarting the decoder Example Restarting the decoder http://192.168.0.11/cgi-bin/decoder.cgi?com=netvup&submit=RESTART UPDATING DEFAULT SETTINGS ENCODER Page Page DECODER SPECIFICATIONS ENCODER Standard Accessories DECODER Standard Accessories