Foxconn 661M03 Floppy disk connector, IDE connectors, Flash Rom, South Bridge controller

Models: 661M03

1 104
Download 104 pages 51.93 Kb
Page 15
Image 15

Chapter 1 Product Introduction

9Floppy disk connector

This connector accommodates the provided ribbon cable for the floppy disk drive. One side of the connector is slotted to prevent incorrect insertion of the floppy disk cable.

10IDE connectors

These dual-channel bus master IDE connectors support Ultra DMA 133/ 100/66/33 devices. Both the primary (blue) and secondary (white) connectors are slotted to prevent incorrect insertion of the IDE ribbon cable.

11Flash Rom

This 4Mb firmware contains the programmable BIOS program.

12South Bridge controller

Referred to as the SiS 963/SiS 963L MuTIOL Media I/O, this controller integrates the audio controller with AC’97 interface, Ethernet MAC, Universal Serial Bus Host controller, IDE Master/Slave controllers and the MuTIOL Connect to PCI Bridge.

13PCI Slots

These three 32-bit PCI 2.2 expansion slots support bus master PCI cards like SCSI or LAN cards with 133MB/s maximum throughput.

14CNR Slot (optional)

This slot is specifically designed for the Communication and Networking Riser (CNR) card. The CNR supports V.90 analog modem, 2-channel audio, etc.

15LAN PHY

The SiS 963L/963 integrated 10/100Mbps Fast Ethernet with Realtek external PHY supports your local area networking needs.

16Audio CODEC (optional)

The ALC655 is an AC’97 CODEC that allows 6-channel audio playback. The audio CODEC provides six DAC channel for 5.1 surround sound, S/PDIF output and Line-in stereo inputs, integrated headphone amplifier, greater than 90dB dynamic range with the jack sense and jack enumeration feature.

 

7

661M03 Series User Manual

 

Page 15
Image 15
Foxconn 661M03 Floppy disk connector, IDE connectors, Flash Rom, South Bridge controller, PCI Slots, CNR Slot optional