freeView IP 800 User’s Manual

6.3.1User Console

The settings for the User Consoler are user specific. Meaning the super user can customize these settings for each user separately. Changing the settings for one user does not affect the settings for the other users.

Figure 6-5: User Console Settings (Part 1)

User select box: This selection box displays the user ID which is being modified. The “super” user can change the settings of other users.

Transmission Encoding: The Transmission Encoding setting changes the image-encoding algorithm that is used to transmit the video data to the Remote Console window. It is possible to optimize the speed of the remote screen depending on the number of users working at the same time and the bandwidth of the connection (Modem, ISDN, DSL, LAN, etc.).

Automatic detection: The encoding and the compression level is determined automatically from the available bandwidth and the current content of the video image.

Pre-configured:The pre-configured settings deliver the best result because of optimized adjustment of compression and colour depth for the indicated network speed.

Manually: Allows both the compression rate and the colour depth to be adjusted individually. Depending on the selected compression rate the data stream between the freeView IP 800 and the Remote Console will be compressed in order to save bandwidth. Increasing the compression rate requires more resources from the freeView IP 800, thus should not be used

49

Page 51
Image 51
Freedom9 IP 800 manual User Console Settings Part