Freedom9 IP 800 manual Dynamic DNS

freeView IP 800 User’s Manual

Secondary DNS server IP Address: IP address of the secondary Domain Name Server. It will be used if the Primary DNS Server cannot be contacted.

Remote Console and HTTPS port: Port number which the device’s Remote Console server and HTTPS server are listening on. If left empty the default value will be used.

HTTP port: Port number which the device’s HTTP server is listening on. If left empty the default value will be used.

Telnet port: Port number which the device’s Telnet server is listening on. If left empty the default value will be used.

Bandwidth limitation: The maximum network traffic generated by the device. Value in kbit/s.

Enable Telnet access: Select this option to allow access to the freeView IP 800 using the Telnet Gateway see Section 6.5.5 for more details.

Disable Setup Protocol: Enable this option to exclude the freeView IP 800 from the setup protocol.

6.4.2Dynamic DNS

Figure 6-10: Dynamic DNS

A freely available Dynamic DNS service (e.g. dyndns.org) can be used in the scenario shown in Figure 6-11:

55