Cord Routing Change
Unplug unit.
Your Kühl Q unit will come with the power cord already installed and routed to the left side of the unit.
For convenience and optimum appearance the direction that the power cord exits the unit may be changed from left to right by following the procedure below. Select the exit location on the left or right based on proximity to the power outlet.
STEP 1. Remove Decorative Front Cover. (See Figures 18A and 18B)
1 OPEN THE DECORATIVE FRONT COVER
WARNING
Electrical Shock Hazard
Make sure your electrical receptacle has the same configuration as your air conditioner’s plug. If different, consult a Licensed Electrician.
Do not use plug adapters.
Do not use an extension cord.
Do not remove ground prong.
Always plug into a grounded 3 prong oulet. Failure to follow these instructions can result in death, fire, or electrical shock.
2 LOCATE AND DISCONNECT ELECTRONIC CONTROL POWER CABLE HARNESS.
Figure 18A | 2 | REMOVE ELECTRONIC CONTROL |
|
| POWER CABLE HARNESS |
1 |
|
|
Figure 18B |
3 |
SCREWS ATTACHING DECORACTIVE |
FRONT COVER TO UNIT |
(4 REQUIRED) |
26 |
3 | REMOVE 4 SCREWS ATTACHING DECORATIVE |
| FRONT COVER. SAVE TO REINSTALL LATER. |
4 | REMOVE DECORATIVE FRONT COVER. |
STORE IN A SAFE PLACE TO REINSTALL LATER. |
(no image)
