STEP 2. In order to run the power cord to the right of the unit, route the cord along bottom inside of the unit (See Figures 20 and 21), under the lower left mounting screw embossments (See Figure 22) and exit the cord through right side cord opening (See Figure 22) of the decorative front cover. Decorative front cover will keep cord in place.
Figure 19 |
FACTORY SETTING WITH |
CORD PLACEMENT |
FRR201 |
Figure 20
NEW CORD ALIGNMENT FOR ROUTING CORD
EXIT TO THE RIGHT OF UNIT
FRR202
STEP 3. Reinstall the 4 screws removed earlier to secure Decorative front cover with cord exiting to the front bottom of the unit. (4 screws RETAINED FROM STEP 1)
Figure 21
CORD UNDER
LEFT MOUNTING
SCREW
EMBOSSMENT
FRR099 |
Figure 22 |
CORD ROUTING |
CORD ROUTING |
FRR200 |
27