External Control Status, Advanced Functions | Friedrich SQ05, SQ10, SQ06, SQ08

External Control Status

The $MART icon illuminates to indicate that the system is being controlled remotely.

AUTO FAN 79 F

SET POINT

$MART

FRR125

AUTO FAN 79 F

SET POINT

FRR126

The icon illuminates to indicate that the system is receiving a Wi-Fi connection.

ADVANCED FUNCTIONS

Your unit's advanced functions (Timer, Schedule, Test Mode, and Mainte- nance Menu). The functions mentioned in the following section may or may not be available depending on the air conditioner model.

Timer/Schedule Select

AUTO FAN 79 F

SET POINT

FRR136

The control system has:

Timer (factory default) - Allows you to command the unit to turn ON and OFF at time you program within a 7 day window. Setting the start, stop and day window can be found later in this manual.

Residential (Schedule #1) - When selected the unit follows a preprogrammed set of operational parameters that covers 7 days of the week with 4 time windows during each day. Each time window has it's own set of 6 operating parameters. Refer to Addendum.

Commercial (Schedule #2)- When selected the unit follows a pre- programmed set of operational parameters that covers 7 days of the week with 2 time windows during each day. Each time window has it's own set of 6 operating parameters. Refer to Addendum.

SCHEDULE

FRR137

1.To change the selection, press and hold the TIMER/SCHEDULE button for 3 sec.

If the Schedule function is available, the system displays the icon + SCHEDULE icon. The display indicates the schedule function that is active.

To change to an alternate schedule (2 or 3), press the or button. If the Schedule function is not available, the Timer icon shows without the SCHEDULE icon.

To save and exit this selection, press the TIMER SET button for 3 sec. (Figure 8).

If there is no button activity for 15 seconds, the function will time out and leave the original selection. Once the selection is saved or timed out, the display reverts to the normal display.

SCHEDULE

FRR138

After pressing the or button, within 15 second of pressing the button for 3 seconds, the display indicates a change to Timer/Scheduler 2. To save and exit this selection, press the TIMER SET button (Figure 8).