Frymaster 2424G, 1824G manual Functional Description, NON-CEAltitudes of 2000 feet or less

24G SERIES FLATBOTTOM GAS FRYERS CHAPTER 1: SERVICE PROCEDURES

1.1 Functional Description

24G Series Flatbottom gas fryers contain a welded steel frypot (mild steel) with heat-transfer ducting on the frypot bottom for efficient heating of oil without scorching. A draft inducer draws air over the burners for combustion. Air movement directs the combustion products back and forth across the frypot bottom by means of a set of baffles, transferring the heat evenly. Cold air is prevented from entering the combustion chamber and cooling the oil during the coasting cycle.

Flames originate from orifices in three tubular burners positioned at the front and beneath the frypot. The diameter of the orifices differs for Natural (CE:G20/G25) and LP (CE:G31) gas as indicated in the table below.

NON-CE (Altitudes of 2000 feet or less)

MODEL	INPUT	GAS TYPE	ORIFICE
	(BTU)		[DRILL SIZE (MM)]
1824/2424G	120	NAT	#34 (2.82)
		LP	#50 (1.78)

ORIFICE

PART #

810-2051

810-2317

QTY	EQUIPMENT
	PRESSURE
	MBAR	INCH W.C.
3	10	4
3	27.5	11

CE ONLY (Altitudes of 2000 feet or less)

MODEL	INPUT	GAS TYPE	ORIFICE
	(kW)		(MM)
	30,0	G20	2,50
1824/2424G	(88,000	G25	2,50
	BTU)	G31	1,60

ORIFICE

PART #

810-2628

810-2628

810-2317

QTY	EQUIPMENT
	PRESSURE
	MBAR	INCH W.C.
3	14,5	5,8
3	21,0	8,4
3	31,0	12,44

1-1