Fujitsu C2111, C2010 manual Network Connection, Network Settings

B5FH-5971.book Page 60 Thursday, May 23, 2002 4:13 PM

L i f e B o o k C S e r i e s N o t e b o o k – S e c t i o n F i v e

P O I N T

Be sure to specify the encryption keys. If you do not specify the keys, any computer with a wireless LAN card can be connected. This presents a risk that other users may steal or destroy your data.

Item		Description
Network	Enter the network name to which you
Name	want to connect. This is a required item.
SSID	For the network name, ask your LAN
	administrator.
	AdHoc network: Set the same name for all
	of the computers that are to be connected.
	Infrastructure network: Specify the same
	name as that specified on the access point
	that is to be connected. For access point
	instructions, refer to the manual that
	comes with the access point.
Key	Click the down arrow and select the input
Format	for the Network key.
	ASCII	Select this when using
	characters	ASCII characters for the
		Network Key. Characters
		that can be used follow:
		0-9, A-Z, a-z, and
		_ (underscore)
		Example: To set the key to
		“ABC12”, input “ABC12”.
	Hexa-	Select this when using
	decimal	hexadecimal characters for
	characters	the Network Key.
		Use this if there is a wireless
		LAN card in the network
		that has the Network Key
		set to a character code. In
		’Network Key’, input the
		same value as the other
		wireless LAN card.

Table 10: Setting parameters

8.When you finish your entry, click [OK]. [Wireless Network Connection 2 Properties] appears again.

9.Make sure the network name you specified for the SSID in Step 7 is added under [Preferred networks].

Network Connection

The section describes how to set the network connection for a computer running Windows XP.

Network Settings

In this section, you set “TCP/IP Settings,” and complete “Checking Computer Name and Workgroup” required for the network connection.

TCP/IP Settings

1.On [Wireless Network Connection Properties], click [General].

P O I N T

If [Wireless Network Connection 2 Properties] is not displayed, click [Start] -> [Settings] -> [Control Panel], and double-click the [Network Connection] icon.

Right click the [Wireless Network Connection], and then click [Properties] from the menu that appears.

2.Perform the following steps.

■Click [Internet Protocol (TCP/IP)].

■Click [Properties]. [Internet Protocol (TCP/IP) Properties] appears.

3.Set an IP address. Ask your network administrator and check the setting.

Item	Description
AdHoc	Set the IP address and subnet mask.
Network	Click [Use the following IP address].
	Enter a value for [IP address] and
	[Subnet mask]. See “About IP
	Addresses” on page 27 to set IP
	address and subnet mask.
For	Select [Obtain an IP address
Infrastructure	automatically]. For the DNS server,
Network	select [Obtain DNS server address
	automatically]. For the IP address,
	DNS server, and default gateway,
	follow the network administrator's
	instructions, if any.

Table 11: Setting an IP address

5. Click [OK].

P O I N T

If you have changed the setting, [Close] is shown instead. Click [Close].

6. Close [Network Connection].

Checking the Full Computer Name and Workgroup

1.Click [Start] -> [Control Panel]. Make sure the Classic View is selected.

60