Appendix 3 Replacing Consumables
| The glass of the inside of the | |
CAUTION | ADF becomes hot during opera- | |
tion. | ||
|
When you clean the inside of the scanner, turn OFF the power and unplug the AC cable from the outlet and wait for at least three minutes.
Consumables and
Replacement Cycle
The following table shows the specifications of consumables and guidelines for the replacement cycle.
TABLE 6.
|
| Standard |
Description | Part No. | Replacement |
Cycle | ||
|
|
|
Brake Roller | After 250,000 | |
|
| scans or one |
|
| year. |
Pick Roller* | After 250,000 | |
|
| scans or one |
|
| year. |
* A set of two rollers.
For purchase of consumables, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.
The replacement cycles above are rough guidelines for the case of using A4/Letter woodfree or wood containing paper 64 g/m2 (17 lb). This cycle varies according to the type
of the used paper and how frequently the scanner is used and cleaned.
Use only the specified consumables.
ATTENTION
Do not use other consumables.
The following pictures shows the locations of the parts to be replaced. Refer to "Chapter 4 Replacing Consumables"