Fujitsu M600R, M200R DAT Unit, 129, Setting in operating system, Setting an Internal DAT

11.5 DAT Unit

11.5 DAT Unit

This section describes the front panel indicators and buttons of the 4-mm DAT unit, and explains how to use the DAT unit.

Setting in operating system

Before using the DAT unit, the /kernel/drv/st.conf file must be modified. The modification is described below.

Setting an Internal DAT

1Copy the original st.conf file as below.

# cp /kernel/drv/st.conf /kernel/drv/st.conf.old

2Add the following to the /kernel/drv/st.conf file.

tape-config-list =
"HP	C1537A", "HP DDS3 4mm DAT", "HP_data2";

HP_data2 = 1,0x34,1024,0xd639,4,0x00,0x13,0x24,0x3,3;

IMPORTANT

The space between HP and C1537A must be 6 spaces. If the effective tape-config-list has been defined, separate the above description with a "," and add it to the file like the following example.

Tape-config-list =
"EXABYTE EXB-8505",		"Exabyte 8mm EXB-8505", "EXBT-8SC",
"HP	C1537A",	"HP DDS3 4mm DAT", "HP_data2";

EXBT-8SC = 1,0x35,0,0xce39,2,0x15,0x8c,1;

HP_data2 = 1,0x34,1024,0xd639,4,0x00,0x13,0x24,0x3,3;

3Remove the contents of the /dev/rmt directory as follow.

#cd /dev/rmt

#rm *

4Do a reconfigure boot as follow.

#cd /

#touch /reconfigure

#shutdown -y -i0

5Then, make a reconfigure boot as follow. ok boot -r

129