Fujitsu MB96300 manual Can Connector X6, Canl, Canh, Can Connector Signals

SK-96370-144PMC-GDC User Guide

Chapter 4 Connectors

4.4CAN Connector (X6, X8)

Two 9-pin D-Sub male connectors are used for the CAN interfaces CAN0 and CAN1. Both CAN interfaces can be used simultaneously.

		Figure 4-3: CAN Connector
Pin Number	Pin Signal		Description
1	NC		Not used
2	CANL		LOW-level CAN voltage input/output
3	GND		Ground
4	NC		Not used
5	NC		Not used
6	NC		Not used
7	CANH		HIGH-level CAN voltage input/output
8	NC		Not used
9	NC		Not used
Shield	GND		Ground

Table 4-2: CAN Connector Signals

© Fujitsu Microelectronics Europe GmbH - 25 - FMEMCU-UG-960014-10