Contents
0 | Contents |
| |
REVISION HISTORY | 2 | ||
WARRANTY AND DISCLAIMER | 3 | ||
0 | CONTENTS | 4 | |
1 | OVERVIEW | 6 | |
| 1.1 | Abstract | 6 |
| 1.2 | Features | 7 |
| 1.3 | General Description | 8 |
2 | INSTALLATION | 10 | |
| 2.1 | 10 | |
| 2.2 | Default Jumper settings for MB96370 Series | 11 |
| 2.3 | Jumper Location | 13 |
3 JUMPERS AND SWITCHES | 14 | ||
| 3.1 | Operating Mode (S1) | 14 |
| 3.2 | Power Supply (S2, JP: 8, 15, 16, 17, 22) | 15 |
| 3.3 | Subclock (JP: 1, 2) | 16 |
| 3.4 | Analog Power Supply Voltage (JP: 11, 12, 13, 14) | 17 |
| 3.5 | Alarm Comparator (JP: 85) | 17 |
| 3.6 | Reset Generation (JP: 33, 41, 46, 47, 48) | 18 |
| 3.7 | User Buttons SW1, SW2, SW3, SW4, SW5, SW6 (JP: 3, 4, 5, 6, 7) | 19 |
| 3.8 | I2C | 19 |
| 3.9 | LIN / UART | 20 |
| 3.10 | CAN interfaces (JP: 24, 26, 34, 35) | 21 |
| 3.11 | External Flash memory (JP: 49, 52, 56) | 22 |
| 3.12 | External SRAM memory (JP: 50, 53, 59) | 22 |
| 3.13 | Graphic Display Controller interface (JP: 54, 55, 56, 57, 58, 60, 85, 86) | 23 |
4 CONNECTORS | 24 | ||
| 4.1 | Power connector (X7) | 24 |
| 4.2 | MCU pin header connectors (X20A, X20B, X21, X22 and X23) | 24 |
| 4.3 | 24 | |
| 4.4 | CAN Connector (X6, X8) | 25 |
| 4.5 | 26 | |
| 4.6 | 27 | |
| 4.7 | Alarm Comparator Connector (J2) | 28 |
| 4.8 | External Supply Voltage Vin (J3) | 28 |
- 4 - | © Fujitsu Microelectronics Europe GmbH |
