Fujitsu MCF3064AP, MCE3064AP, MCE3130AP manual Tables

TABLES

		page
2.1	Model and order number	2	- 1
2.2	Specifications	2	- 3
2.3	Environmental and power requirements	2	- 7
2.4	Recommended optical disk cartridge specifications	2	- 10
2.5	Disk specifications	2	- 13
3.1	Temperature requirements at measurement points	3	- 3
3.2	Temperature at each measuring point (Reference)	3	- 4
3.3	Cable connector specifications	3	- 13
4.1	Differences in Host Interface Specifications of Each Model	4	- 1
4.2	Connector pin assignments	4	- 2
4.3	Signal description	4	- 4
4.4	I/O port functions and mapping	4	- 5
4.5	Bit definitions of Alternate Status register	4	- 6
4.6	Bit definitions of Device Control register	4	- 6
4.7	Bit definitions of Drive Address register	4	- 7
4.8	Bit definitions of ATAPI Byte Count register	4	- 7
4.9	Bit definitions of ATAPI Block Device Select register	4	- 8
4.10	Bit definitions of Error register	4	- 8
4.11	Bit definitions of ATAPI Features register	4	- 9
4.12	Bit definitions of ATAPI Interrupt Reason register	4	- 9
4.13	IO and Cod	4	- 10
4.14	Bit definitions of ATAPI Status register	4	- 10
4.15	Alternate sector assignment criteria	4	- 13
4.16	ID error and read error detection criteria and error handling	4	- 14
4.17	LED indications	4	- 20
4.18	Command codes and parameters	4	- 21
4.19	IDENTIFY PACKET DEVICE command	4	- 22
4.20	Device parameter information (1/5)	4	- 23
4.21	PACKET command	4	- 27
4.22	DEVICE RESET command	4	- 28
4.23	CHECK POWER MODE command	4	- 28
4.24	Power mode indication	4	- 29

xviii C156-E142-02EN