Fujitsu MCF3064AP, MCE3064AP, MCE3130AP manual Device parameter information 3/5

Table 4.20 Device parameter information (3/5)

Word	Value	Bits	Description
69-70	0000h		Reserved
71	07D0h (2000)		Required time after the PACKET command is received until the bus
			is released (∀s) (Typical)
72	03E8h		Required time after the SERVICE command is received until BSY
	(1000)		is cleared (∀s) (Typical)
73-79	0000h		Reserved
80	0010h		Major Version number (ATA/ATAPI-4)
81	0000h		Minor Version number (unused)
82	4278h		Command set supported
			(A value of less than 1 indicates that the command is supported.)
		15	IDENTIFY DEVICE DMA command (B'0')
		14	NOP command (B'1')
		13	READ BUFFER command (B'0')
		12	WRITE BUFFER command (B'0')
		11	WRITE VERIFY command (B'0')
		10	Host protect area function (B'0')
		9	DEVICE RESET command (B'1')
		8	SERVICE command interrupt (B'0')
		7	Interrupt at release (B'0')
		6	Read ahead cache (B'1')
		5	Write cache (B'1')
		4	Packet command function (B'1')
		3	Power management function (B'1')
		2	Removable media function (B'0')
		1	Security mode (B'0')
		0	SMART function (B'0')
83	4000h		Command set supported
			(A value of less than 1 indicates that the command is supported.)
		15	Always B'0'.
		14	Always B'1'.
		13-1	Reserved
		1	DOWNLOAD MICROCODE command supported (B'0')

C156-E142-02EN 4 - 25