Fujitsu MHY2060BH, MHY2160BH, MHY2200BH manual Installation Conditions, Theory of Device Operation

Contents

2.2	System Configuration		2-3
	2.2.1	SATA interface	2-3
	2.2.2	Drive connection	2-3
CHAPTER 3	Installation Conditions		3-1
3.1	Dimensions		3-2
3.2	Mounting		3-3
3.3	Connections with Host System		3-9
	3.3.1	Device connector	3-9
	3.3.2 Signal segment and power supply segment		3-10
	3.3.3	Connector specifications for host system	3-10
	3.3.4	SATA interface cable connection	3-11
	3.3.5	Note about SATA interface cable connection	3-11
CHAPTER 4 Theory of Device Operation			4-1
4.1	Outline		4-2
4.2	Subassemblies		4-2
	4.2.1	Disk	4-2
	4.2.2	Spindle	4-2
	4.2.3	Actuator	4-2
	4.2.4	Air filter	4-3
4.3	Circuit Configuration		4-3
4.4	Power-on Sequence		4-6
4.5	Self-calibration		4-8
	4.5.1	Self-calibration contents	4-8
	4.5.2	Execution timing of self-calibration	4-9
	4.5.3	Command processing during self-calibration	4-9
4.6	Read/write Circuit		4-10
	4.6.1	Read/write preamplifier (PreAMP)	4-10
	4.6.2	Write circuit	4-10

x C141-E262