E-39
English

When rotating text (for installing the display with one of its sides

facing down)

• Rotating text (OSD rotate) All modes

You can use this option to rotate the text.
Each time you press or , one of the available choices appears in the following sequence:
-90 Deg.: Displays text from left to right when the display is installed with the power indicator
lamp at the top.
Normal: Displays text normally.
+90 Deg.:Displays text from left to right when the display is installed with the power indicator
lamp at the bottom.

When selecting automatic switching to desired mode

• Input mode of priority (Input priority) All modes

You can use this option to switch between modes only when a signal is received through the
selected input mode terminal. You cannot switch the input mode.
Each time you press or , one of the available choices appears in the following sequence:
Off: Switches between modes normally.
Other modes:Displays images when a signal is received through the selected input mode
terminal.
*You cannot switch between RGB1 and RGB2.
You cannot select the currently selected mode.
You cannot switch between input modes when you have selected a mode with this option.

When changing sound input

• Selecting input terminals (Audio input) All modes

You can use this option to select one of the two available terminals to receive sound from input
equipment.
Select “Audio input” and press or .
The “Audio input” selection screen will appear.
Press or to select input equipment.
Select a desired input terminal.
Each time you press or , one of the available choices appears in the following sequence:
Audio 1, Audio 2: Selects Audio 1 or 2 for receiving sound in the corresponding mode.
No audio: No sound in the corresponding mode.
* Repeat steps 2 and 3 for each piece of input equipment.
Press when you finish to return to the Extended menu screen.

• Enabling 3D Y/C Circuit (3D Y/C)

Selects whether to use the 3D Y/C circuit.
Each time you press or , one of the available choices appears in the following sequence:
On Off
On: Enables the 3D Y/C circuit.
You can make this selection only for 3.58NTSC signal.
Off:Enables 3-line.
“Audio input” selection screen
* On-screen information disappears if you do not take any action for 60 seconds.
* The following abbreviations used in this document represent input modes in which you can make adjustments:
: Video mode, : S-video mode, : Comp.video mode, : RGB1 mode, : RGB2 mode