WATCHING IMAGES ON THE WIDE SCREEN
SWITCHING BETWEEN SCREEN SIZES
1
2
Press 
.
The currently selected mode will appear.
Press |
| to select a desired |
|
image mode.
Each time you press 
, a different image mode appears. The sequences used are as follows:
When you are in a video input mode
Normal mode
When you are in an RGB input mode
Wide1 mode
*You can also use the switches on the display’s control panel to accomplish these steps.
Information
•You cannot select Auto mode when you are in Comp.video mode (video input mode).
•You may not be able to watch images clearly in Auto mode, depending on the contents of the image software you use. If you experience problems,
use 
to switch to a mode that provides the optimum screen size.
*With some games, the zoom screen (with upper and lower unviewable areas) may be selected.
*With some images of standard size (i.e., 4 (frame width) x 3 (frame height)), the zoom screen may be selected if the upper and lower sections of the image in a scene are extremely dark.
*Some images are designed such that the zoom screen is automatically selected as necessary. With some of these images, however, the screen size may not be immediately switched over to the zoom screen if the first scene contains an extremely dark image.
Note
•A variety of image modes are available with this display. Remember that if you select a mode with an aspect ratio (ratio of frame width to frame height) different from that of the TV program or video media, the images will appear differently than if you had selected a mode having the same aspect ratio.
•Showing a movie or similar premium event at a different aspect ratio from its original one at any event site, restaurant, or bar for
For films, try to select a mode having the same aspect ratio as the original image; this enables the director’s original intent ions to be preserved.
Reference
See P.
