Fujitsu RX200 S2 - page 103

103
PRIMERGY RX200 S2 User’s Guide
3
OS Installation Using ServerStart
4Click [Start].
Installation starts. At steps where the CD-ROM for resources such as the OS to be installed is
necessary, the resource is automatically acquired from the resource server via the network.
5Eject the CD-ROM and floppy disk and click [OK].
The system restarts. When the installation is completed, an installation completion message
appears on the target server.
6Press any key on the target server.
7Restart the system on the target server.
The server setup and OS installation have been completed.
Refer to "Chapter 5 Operations after OS Installation" (pg.127) and perform necessary procedures
before starting server operations.