Fujitsu RX200 S2 - page 194

194
Chapter 7 Installing Internal Options
5Install the internal hard disk unit into the server.
With the handle on the internal hard disk unit in the raised position, insert the unit all the way into
the bay.
6Push down the handle on the internal hard disk unit until it clicks into position.
■How to Remove the Internal Hard Disk Unit
1Open the rack door.
"1.4.1 Opening the Rack Door" (pg.28)
2Turn off the server and peripheral devices, then unplug the power cables from
the server.
"1.4.3 Turning Off the Server" (pg.32)
3Touch a metal part of the server to discharge static electricity.
4Remove the internal hard disk unit.
With the front tab of the internal hard disk unit pressed, turn the handle upward (1) and pull the
hard disk unit towards you (2). To remove the internal hard disk unit, use both hands to pull it out.
Handle
Handle
2
Tab
1
Handle