197
PRIMERGY RX200 S2 User’s Guide
Installing Internal Options
7
7.8.2 Installable Power Supply Unit
The following power supply unit can be installed on this server.
7.8.3 How to Install a Power Supply Unit
This section explains how to install a power supply unit.
1Turn off the server and peripheral devices ("1.4.3 Turning Off the Server"
(pg.32)). Unplug the power cable for the optional power supply unit from the
rear of the server.
2Remove the power cable from the power supply unit in the front.
3Remove the dummy unit while pressing the green lever.
Hold the handle on the dummy unit and pull it out.
table: List of Installable Power Supply Units
Product name Model Remarks
Power Supply Module PG-PU116
• Areas around the power supply unit may be very hot. Turn off the power and
wait for a while before starting work.
Power cable
[Front]
Dummy unit
Handle Green lever