233
PRIMERGY RX200 S2 User’s Guide
8
Hardware Configuration/Utilities
8.3 SCSI Setup Utility
This section explains settings for the SCSI Setup Utility and items regarding each
setting. When an array is configured with the onboard SCSI array controller, settings
in the SCSI Setup Utility must be made.

8.3.1 Starting and Exiting the SCSI Setup Utility

The following explains how to start and exit the SCSI Setup Utility.
■How to Start the SCSI Setup Utility
1During server startup (POST), press the [Ctrl] + [C] keys while the message
"Press Ctrl-C to Start LSI Logic Configuration Utility..." is displayed on the
screen.
The [Main] menu appears.
2Select the menu or adapter to be configured.
• Pressing the [Esc] key moves the cursor from the header to the adapter list area.Use the [←] and [→] keys to select between [Boot Adapter List] and [Global Properties].• Pressing the [ F2] key moves the cursor from the list area to th e header. When you move the cursor for the first time, press the [F2] key twice.Use the [↑] and [↓] keys to select the adapter to be configured.
3Press the [Enter] key.
The selected menu appears.
4Configure menus and adapters.
LSI Logic MPT SCSI Setup Utility Version MPTBIOS-IMx.xx.xx
<Boot Adapter List> <Global Properties>
Esc=Abort/Exit ArrowKeys=Select Item -/+=Change[Item]
Home/End=Select Item Enter=Execute<Item>
F2=Menu
LSI Logic Host Bus Adapters
Adapter
<1020/1030
PCI
Bus
3
Dev/
Func
28>
Port
Number
3000
IRQ
10
NVM
Yes
Boot
Order
0
LSI Logic
Control
Enabled
RAID
Status
--
HeaderList area