112
Chapter 4 Manual OS Installation
4.1.2 How to Create Driver Disks
Driver disks are created from the ServerStart CD-ROM using the ServerStart FloppyBuilder function.
If ServerStart has already been started, it is not necessary to restart it. If it has not, start it up according to
the following procedures.

■Starting ServerStart

●For Creation on a Client Computer
When the CD has been copied on Windows 2000 Professional/Windows XP
Professional
1Click [Start] → [Programs] → [Fujitsu ServerStart] → [ServerStart].
ServerStart starts up and the [Welcome to ServerStart] window appears.
When Windows NT is used, or if the CD has not been copied
1Insert the ServerStart CD-ROM into the client computer.
ServerStart starts up and the [Welcome to ServerStart] window appears.
●For Creation on the Server
1Turn on the server and insert the ServerStart CD-ROM immediately.
ServerStart starts up and a message appears prompting you to insert the ServerStart floppy disk.
2Insert the attached "ServerStart floppy disk" into the server's floppy disk drive.
Then make sure "Removable media" and "A:" are selected and click [Create].
A network setup window for remote installation appears.
If a configuration file already exists in the ServerStart floppy disk and [OK] is clicked without
clicking [Create], the [ServerStart Unattended Mode] window appears. Make sure to click
[Exit]. The [Welcome to ServerStart] window appears.
If [Start] is clicked in the [ServerStart Unattended Mode] window, the installation of the server
will start and all disk contents will be deleted.