228
Chapter 8 Hardware Configuration/Utilities
8.2.14Memory Status Submenu

Appears when [Memory Status] is selected from the [Server] menu.

This submenu sets whether or not to allow the use of the installed memory.

table: Items on the Memory Status Submenu
Item Setting Description
DIMM A1 • Enabled (at the tim e of
purchase)
• Disabled
• Failed
Sets whether or not to allow the use of memory in
Memory Slots A1 to B4.
For memory slot locations, refer to "7.4.1 Where to
Install the Memory Modules" (pg.175).
This must not be set to [Disabled] or [Failed].
DIMM A2
DIMM A3
DIMM A4
DIMM B1
DIMM B2
DIMM B3
DIMM B4
Item Specific Help
PhoenixBIOS Setup Utility
Server
Memory Status
Select Sub-Menu
F1
Esc
Select Item
Select Menu
Change Values-/+
Enter
Info
Exit
F9
F10
Setup Defaults
Save and Exit
ChannelA
DIMM A1: [Enabled]
DIMM A2: [Enabled]
ChannelB
DIMM B3: [Enabled]
DIMM B4: [Enabled]
DIMM A3: [Enabled]
DIMM A4: [Enabled]
DIMM B2: [Enabled]
DIMM B1: [Enabled]