37
PRIMERGY RX200 S2 User’s Guide
1
Overview
1.5 Workflow

Use the following workflow from server installation to start of operation.

Selecting the installation method
Referring to "2.2 Selecting the Installation Method", decide what installation method to use.
ServerStart, a software that enables everything from OS installation/setup to the installation of high
reliability tools to be performed in one operation, comes with this server. It is recommended that
ServerStart is used to perform installation.
Installing the server
Referring to "Safety Precautions" and "Start Guide", install the server to a suitable place.
Preparing the server
- Install internal options
- Set hardware
Referring to "2.1 Preparation on the server", "Chapter 7 Installing Internal Options", and
"Chapter 8 Configuring Hardware and Utilities", prepare the server.
Checking precautions on installation
Before installing the OS, check the precautions on installation by referring to "2.3 Precautions on Installation".
Procedures before operation
Before operating the server, refer to "Chapter 5 Operations after OS installation".
High reliability tool installation
Start operations
Install internal options
Referring to "Chapter 7 Installing Internal Options", install the internal options.
Using ServerStart
Referring to "Chapter 3 OS Installation Using
ServerStart", perform OS installation.
Manual installation
Referring to "Chapter 4 Manual OS
Installation", perform OS installation.

OS installation

When the OS is installed manually, it is necessary to install high reliability tools. ServerView requires
settings before server operation. For installation method and details about each high reliability tool, refer to
"Chapter 6 High Reliability Tools".