54 SPARC Enterprise T5140 and T5240 Servers Installation Guide • February 2008
The CPU and memory controllers initialize, and eventually OpenBoot initializes.
After a number of system console messages, the ok prompt appears, or the system
will boot into the Solaris OS.
Note – System behavior depends on how the auto-boot variable is set. See the
SPARCEnterprise T5140 and T5240 Servers Service Manual for more information.
The following example output is a small section of the complete output.
Devices in the OpenBoot Device Tree
0:1:0>
0:1:0>SPARC-Enterprise[TM] T5140/T5240 POST 4.27.x.
2007/12/11 18:55
...
0:1:0>Network Interface Unit Tests....Done
0:1:0>Functional CPU Tests....Done
0:1:0>Extended Memory Tests....Done
2007-12-14 16:45:28.800 0:1:0>INFO:
2007-12-14 16:45:28.806 0:1:0> POST Passed all devices.
2007-12-14 16:45:28.816 0:1:0>POST: Return to VBSC.
2007-12-14 16:45:28.824 0:1:0>Master set ACK for vbsc runpost
command and spin...
SPARC Enterprise T5240, No Keyboard
Copyright 2007 Sun Microsystems, Inc. All rights reserved.
OpenBoot 4.27.x, 3968 MB memory available, Serial #74409918.
Ethernet address 0:14:4f:6f:67:be, Host ID: 846f67be.
{0} ok
TABLE3-1 Disk Slot Numbers, Logical Device Names, and Physical Device Names
DiskSlot Number Logical DeviceName*Physical Device Name
Slot 0 c0t0d0 /devices/pci@0/pci@0/pci@2/scsi@0/sd@0,0