2 Procedure
VCAUTION!
The actions described in these instructions should only be performed by technicians, service personnel or technical specialists. Equipment repairs should only be performed by authorized, qualified staff. Any unauthorized opening and improper repairs could expose the user to risks (electric shock, energy hazards, fire hazards) and could also damage the equipment. Please note that any unauthorized opening of the device will result in the invalidation of the warranty and exclusion from all liability.
ÊFirst of all please familiarize yourself with the safety instructions in the section chapter “Safety notes” on page 7 et seqq. .
ÊEnsure that all required manuals (see “Additional documentation about the server” on page 1) are available, printing out the PDF files if necessary. You will definitely need the Operating Manual for the server and the Technical Manual for the system board.
ÊShut down the server correctly, switch it off, pull out the power plug(s), and open the server as described in the chapter “Preparation” on page 13 et seqq. .
ÊExtend or upgrade your server as described in the relevant chapter.
IThe Operating Manual for the server describes how you install/remove the
IProcedures which are identical for the floorstand and rack models are only described for the floorstand model.
ÊClose the server, connect it to the power outlet, and switch it on as described in the chapter “Completion” on page 59 et seqq. .
ÊStart the operating system and, if necessary, configure it as required (see the Operating Manual).
Options Guide | 5 |
