Floorstand model | Preparation |
4.1.2Removing the front cover
Remove the front cover when making the following extensions and upgrades:
–Installing further accessible drives
–Upgrading the floorstand model to a rack model
ÊRemove the hard disk cover as shown in figure 5 on page 15.
2 |
1 |
Figure 3: Removing the front cover
ÊDisengage the three tabs (1) on the left side one after the other and rotate the front cover outward (2) about 2 cm.
2 |
1 |
Figure 4: Removing the front cover
ÊPress the two hooks (1) on the right side inward and pull out the front cover frontward (2).
14 | Options Guide |
