Conversion standard PS to hot-plug PS

Figure 34: Fastening the PS cage at the rear side

ÊFix the locking rail with four screws (see the arrows) on the rear side of the server..

ÊFasten the PS cage with three screws M3x4.5 mm (see the circles) at the rear side.

ÊConnect all power cables to the system board and the drives (see the cabling plans in the Appendix).

46

Options Guide

U41604-Z156-1-76

Page 54
Image 54
Fujitsu TX150 S3 manual Fastening the PS cage at the rear side