Conversion standard PS to hot-plug PS

Figure 39: Fastening the anti-tilt bracket

ÊFasten the anti-tilt bracket using the two knurled screws (1).

ÊClose the server, connect it to the power outlet, and switch it on as described in the chapter “Completion” on page 59 et seqq. .

VCAUTION!

After installing the hot-plug power supply the SDR (sensor data record) data base must be updated. For this sequence you need the BIOS flash diskette prepared before. This diskette contains the newest BIOS version, the BMC firmware and the SDR data.

IYou will find the description of the indicators of the power supply module in the Operating Manual for the PRIMERGY TX150 S3.

U41604-Z156-1-76

Options Guide

51

Page 59
Image 59
Fujitsu TX150 S3 manual Fastening the anti-tilt bracket