7)Select pulselength and press the ENTER/SE- LECT key.
8)Press the ENTER/SELECT key.
9)Press the MENU key.
7)Press the ENTER/SELECT key.
8)Press the MENU key.
|
| SPEED |
HDG 123.4° |
| |
| MANUAL 30.0kt | |
|
|
Table
Range | 0.75 | 1.5 | 3 | 6 | 12 | 24 |
|
|
|
|
|
|
|
PL Set | M1P | M1P | M2P | LP | LP | LP |
No.1 |
|
|
|
|
|
|
|
|
|
|
|
|
|
PL Set | SP | SP | M1P | M2P | LP | LP |
No.2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
Selecting pulselength set to use
Select pulselength set on P/L SEL of the ECHO SIG menu.
0.25 NM
0.05
ZOOM SP
HU
TRU TRAIL
AUTO 00:45 30M
GUARD1
GUARD2
IN
External waypoint
1)Press the MENU key.
2)Select the ECHO SIG menu.
3)Press the ENTER/SELECT key.
4)Select P/L SET and press the ENTER/SE- LECT key.
5)Select P/L1 (or P/L2).
6)Press the ENTER/SELECT key.
7)Press the MENU key.
1.35 Waypoint Display
A waypoint selected on a radionav equipment can be displayed on the radar. This function requires a compass signal.
1)Press the MENU key.
2)Select the INITIAL menu.
3)Press the ENTER/SELECT key.
4)Select NAV DATA and press the ENTER/SE- LECT key.
5)Select EXT WP and press the ENTER/SE- LECT key.
6)Select ON (or OFF).
A/C | NR |
F3 | IR2 |
ES1 | |
| EAV1 |
345.6°R EBL | VRM 0.080nm |
23.0°R | 0.220nm |
29:59 | + 105.0°R 00.74nm TTG 12:34 |
Figure 1-28 Displaying an external waypoint
1.36Outputting Cursor Position (TLL data)
Cursor position can be output to external equip- ment, in IEC 1162 format, by pressing the VRM (TLL) control. This function requires position data and a compass signal.
1 – 26
