9957 | Squelch delay - a delay until the squelch mutes (closes) the receiver after |
| the signal has gone. |
| (Ex) 9957: 1000 ms |
| Squelch closes 1000 ms after the signal has gone. |
| Setting range: |
9958 | Squelch activating frequency |
| Setting range: |
3.3 Writing User Channels
The user channels may write user Tx channels. (Rx channels may also be written where permit- ted.)
1.Turn on the power while pressing the [CH] key. Release the key when MEMO appears.
2.Rotate the [FREQ/CH] control clockwise to display desired channel no. “R” appears (Rx frequency writing mode).
4.Press the [MODE/1] key to select class of emission.
5.Press the [CH] key. Key in Rx frequency with the numeric keys
6.Rotate the [FREQ/CH] control clockwise. “T” appears (Tx frequency writing mode).
7.Enter Tx frequency like you entered Rx frequency.
8.Rotate the [FREQ/CH] control clockwise. If no station name have been written you will see seven dashes. If station name cannot be entered for a particular station, the next channel number appears.
9.Press the [CH] key to enter station name or write over existing name. The cursor appears. A station name may consist of seven characters, hyphens, alphabet, numerics and spaces are available.
10.Operate the [FREQ/CH] control to display character desired and press the [ENT] key. To enter a space or shift the cursor press the [ENT] key. To erase station name, press [CH], [0] and [ENT]. When seven characters are entered, the cursor disappears.
11.Turn off the power to register channels.
