Furuno RP-250 Displaying Waypoints, Displaying waypoints from a navigator, Waypoint menu

4. WAYPOINTS, NAV LINE

4.3Displaying Waypoints

A waypoint may be shown on the display as below.

4.3.1Displaying waypoints

1. Press the [NAV MENU] and [2] keys to choose the WAYPOINT menu.

[WAY POINT]

1 [NAV INFORMATION(1)]

2 WPT MARK OFF/ON

3WPT WPT 00 WPT 00 WPT 00

WPT 00

WPT 00

4

5

6

7 WPT DATA

VIDEO PLOTTER/NAVAID

8 ARRIVAL ALARM OFF/ON x.xxNM

WAYPOINT menu

2.Press the [2] key twice to choose WPT MARK ON and then press the [ENTER] key.

3.Press the [3] key.

4.Enter waypoint number (01 to 98) in two digits and then press the [ENTER] key. The latitude and longitude position of the waypoint appears on the menu and the waypoint is displayed on the screen. Five waypoints may be displayed.

5.Press the [NAV MENU] key to close the menu.

Note 1: To display no waypoints, choose OFF at step 2 in above procedure.

Note 2:To clear all waypoints currently shown, enter 00 at step 4.

4.3.2Displaying waypoints from a navigator

1.Press the [NAV MENU], [1], [0] and [0] keys to show the NAV INFORMATION 3 menu.

2.For other than G-type radar, press the [4] key several times to choose USED WPL WP and then press the [ENTER] key.

3.Press [1], [1], [1] and [2] keys to show the WAYPOINT menu.

4.Press the [7] key to choose NAVAID.

5.Press the [ENTER] key.

6.Press the [NAV MENU] key to close the menu.

Note: Route data fed from a navigator is displayed waypoint by waypoint.

19