4. WAYPOINTS, NAV LINE

Note: Waypoints are automatically switched when own ship is either 1/2 of the arrival alarm range or 0.5 nm from next waypoint, whichever figure is larger. For example, the arrival alarm range is 2 miles. Since 1/2 of the arrival alarm range is 1 mile and it is larger than 0.5 miles, the waypoint will be switched when your ship is 1 mile from a next waypoint.

12.Press the [NAV MENU] key to close the menu.

Note: To display the nav line by using the external data, IEC 61162-1 data sentence BWR, BWC, RMB, or WPL is required. The order of priority is BWR>BWC>RMB>WPL. In case of simultaneous input BWR has priority. To use BWR, BWC, RMB for waypoint sentences, set USED WPL# to NAV LINE in the NAV INFORMATION 3 menu. That is the normal usage. To use the WPL for destination waypoint, set USED WPL# to WPT in the NAV INFORMATION 3 menu. This should only be used when connected to a navigator which outputs only the WPL data sentence. The data sentence and displayed data are as follows:

BWR: Range and bearing to waypoint (great circle)

BWC: range and bearing to waypoint

RMB: Generic navigation data (range and bearing to waypoint, latitude and longitude position of waypoint, course, etc.

WPL: Latitude and longitude of waypoint

Input waypoint

 

 

 

Display Contents

 

 

sentence

 

Display

 

Data Display

 

Radar

Radar/Video

Radar Display

Radar/Video Plotter

 

Display

Plotter Display

 

 

Display

BWR,

WPT No.

WPT

Rng to WPT

WPT

BWC,

Nav line

Nav line

Bearing to WPT

Rng to WPT

RMB, or

 

 

Nav line width

 

(Data not

Bearing to WPT

WPL

 

 

Arrival alarm

 

displayed in

 

 

 

 

 

 

range

 

case of

 

 

 

 

 

 

 

 

sentence WPL)

 

 

When data of

Above data is

Above data is

The above data is

The above data is

above

erased and

erased and

updated and

updated and

sentences

replaced with

replaced with

displayed.

displayed.

changes

latest data.

latest data.

(Data not displayed

 

 

(destination

 

 

 

 

in case of sentence

 

 

waypoint

 

 

 

 

WPL)

 

 

changed)

 

 

 

 

 

 

 

 

 

 

 

 

 

No input of

30 seconds

30 seconds later

30 seconds later

30 seconds later

above

later the

the above data is

asterisks (*) shown

asterisks (*) shown

sentences

above data is

erased.

for above data.

for above data.

(waypoint

erased.

 

 

(Data not displayed

 

 

cancelled)

 

 

 

 

in case of sentence

 

 

 

 

 

 

 

WPL)

 

 

 

 

 

 

 

 

 

 

 

23

Page 29
Image 29
Furuno RP-250 manual Bwr