Furuno RP-250 manual Choosing Display Mode, Video plotter display

1. OPERATIONAL OVERVIEW

1.3Choosing Display Mode

1.Press the [RADAR MENU] key.

2.Press the [9] key to choose display mode desired. The illustration at the bottom of the page shows a sample video plotter display. Note that the video plotter is not available when SHIP TYPE is set for DEEP SEA.

Note: When the radar display is selected, the display shows the indication AIS: OFF and when the radar/video plotter display is in use the indication AIS: ON appears. AIS-related alarms will be released even if the display shows AIS: OFF, provided the AIS feature is active.

Radar Display	Radar/Video Plotter
		Video Plotter

		Display modes
			Arrival	Status of AIS function
			Alarm		Show ON to display
	Range		Range
					AIS symbols.
	Coastline Grid
Range and	12/ 2 NM			AIS FUNC: ON
				DISP: ON
Bearing	+ 3.458NM				Data, Menu
to Cursor	179.9° T				Display	Waypoint
Display	NORTH UP, TM
Mode			10			Mark
						Prohibited
						Area
	Planned					Own Ship
	Route
						Marker
	Nav Line				POSN [DR] MAN
					35° 20.370 N	Position
					141° 18.300 E
					+CURSOR MAN
		011			35° 20.360 N	Cursor
					141° 18.770 E
					2002/05/19 13:28 (UTC)	Position
					- - AIS ALARM - -	Date,
						Time
	Track	AIS Target	Cursor		Message Area
		Symbol			(AIS-related
					messages.)

Video plotter display

3