9. INSTALLATION OF VIDEO PLOTTER KIT
b)Insert supplied floppy disk in the PC, execute the “upe.bat” file. The PC displays “TARGET POWER ON.”
c)Turn on the display unit to load the program. The PC displays “Finish Version up.ted” when the loading is completed.
d)Disconnect the PC connection cable.
e)While pressing and holding down the [HL OFF] key, press the [RADAR MENU] key five times.
f)Press [RADAR MENU], [0], [0], [0], [2], [0], [0], [0], [0].
g)Press the [ENTER] key five times.
h)Turn the power off and on. “Initializing” appears on the display for about 90 seconds.
i)Confirm RP program no. by pressing the [RADAR MENU], [0], [0], [0], [3] and [ENTER].
**: Program number
*1: 03591870** for
|
|
|
|
| |
PROGRAM NO | ROM | RAM | CRAM | DISPSW | |
MAIN | 03591840** | OK | OK |
| 1234 |
ARP | 18590381** | OK | OK | OK | 0000 |
DSP | 18590391** | OK | OK | OK |
|
03591860**, *1 | OK | OK | OK | 00 | |
03591880** | OK |
| OK | 00 | |
| DRAM | OK | OK |
|
|
| RP BOARD BAT | OK |
| SIO | - - |
| RP CARD 1 | OK | CARD 2 |
| OK |
| CARD 1 BAT | OK | CARD 2 BAT | OK | |
ANTENNA SPEED | 23.8 RPM |
|
|
| |
TRIG FREQ | 143.2 Hz |
|
|
| |
MAG CURRENT | 11.1 V |
|
|
| |
R. MONITOR | 1.8 V |
|
|
| |
TUNE IND | 0.8 V |
|
|
| |
| 1 2 3 | 002 |
| 2 5 1 | |
|
|
|
| 0 0 8 | |
To quit press [STBY/TX] key twice.
Test results
16.Retract the stay to close the display unit.
17.Push in the monitor until you hear a “click.”
18.Refasten bolts removed at step 2.
19.Refasten the right and left arm covers.
53
