Furuno RP-250 Displaying Target Data, Activating all sleeping AIS targets, Basic target data

7. AIS OPERATION

7.4.3Activating all sleeping AIS targets

1.Press the [AIS MENU] key to open the AIS menu.

2.Press the [7] key (ACTIVATE ALL TARGETS).

3.Press any menu key to close the menu.

7.5Displaying Target Data

7.5.1Basic target data

1.Place the cursor on an AIS target symbol.

2.Press the [AIS DATA] key to show the target’s basic data. The target is marked as below.

Activated target selected for data display

Ship’s name Call sign Range from own ship to target

Bearing from own ship to target Course over ground Speed over ground

CPA, TCPA Heading, ROT (Rate Of Turn)

Fusion target no.

	VOYAGER
CALL SIGN 1436782		02
RNG	9.92NM
BRG	234.1 TRU
COG*	321.2￿TRU
SOG#	21.1KT
CPA	2.8NM	TCPA	23.5MIN
HDG	234￿TRU	ROTR**	1.1￿/MIN

* = CSE (course) when water tracking mode is selected at radar.

#= STW (speed thru water) when water tracking mode is selected at radar. ** = ROTR: right turn, ROTL: Left turn

Basic data display

3. Press any menu key to close the data display.

Note: You may also show basic data by pressing the [AIS MENU] key followed by the [3] key (BASIC DATA). Basic data is hidden by the AIS1 menu; close the AIS1 menu to show basic data.

34