Furuno RP-250 manual Installation of Video Plotter KIT, Tabletop/Console Type, Necessary parts

9INSTALLATION OF VIDEO PLOTTER KIT

9.1Tabletop/Console Type

Necessary parts

RP-250-T-2E-N (Code No. 000-080-196), For NAVIONICS specification RP-250-T-2E-C (Code No. 000-080-197), For C-MAP specification

Name	Type	Qty	Code No.	Remarks
				IF board
				Cable assy.
				M-card base
M-Card Assy.	—	1	—	M-card lid
				M-card case
				M-card case
				cover
RP Board	14P0371A	1	008-528-020	For NAVIONICS
	14P0371B	1	008-528-030	For C-MAP
Pan Head Screw B	M4 x 8 C2700W	4	000-881-445
Pan Head Screw B	M3 x 8 C2700W	2	000-881-404	Not used
Pan Head Screw A	M2.6 x 5 C2700W	2	000-800-973	Not used
Pan Head Screw A	M3 x 8 C2700W	1	000-881-104	Not used
Toothed Washer	M4 C5191W	1	000-864-506
Toothed Washer	M3 C5191W	1	000-864-504	Not used
NH Connector Assy.	03-2059 (5P)	1	008-528-260
Keytop Label	03-144-1531	1	100-299-820
Program Floppy Disk	03-591-84	1	008-528-130	Note 1
Operator’s Manual	OME-30470-X	1	000-809-332

Note 1: Check radar program no. (03591840XX). If the program number of the program in the floppy disk is higher, update the program. If it is the same, it is not necessary to update the program.

Note 2: Windows PC and optional PC connection cable

(Type: JEC9S-XH4P-L1500, Code no.: 000-145-362) also required.

47