OPERATING INSTRUCTIONS continued...
Control Operation
Startup and Normal Operation
•Pressing the On/Off button will power up the control and the oven will begin heating to Preheat
The user can select Preheat Bakery 350 or Preheat Bread 425 to heat the oven to the respective settings. The display will show “Preheat Bakery 1”, “Preheat Bakery 2”, or “Preheat Bread”.
•NOTE: No other buttons are active at this point.
•When the oven temperature is within the ready band
•After the ten minute heat soak, the oven will display “Select Bakery 1” (Preheat Bakery 325), “Select Bakery 2” (Preheat Bakery 350), or “Select Bread” (Preheat Bread 425).
•LED’s will light for items that can be selected for cooking.
•Pressing a product button (provided the LED is illuminated) once will begin the countdown cycle for the programmed time.
•NOTE: Any item that can also be cooked will have its LED illuminated
During the Cooking Cycle:
1.The display will show the product and the count down time remaining.
2.The LED of the selected item will flash and the oven light will turn on.
3.Up to three, (3), more product buttons can be selected for cooking as long as their LED’s are lit. The count down time of the product that will be done first will be displayed and the corresponding LED will flash rapidly. The LED’s of the other products cooking will flash slowly.
4.The external display will show the count down time of the item to be done first, then will switch to the next item to be done and so on.
• NOTE: To cancel a cook cycle, Press the Cancel button. If more than one cook cycle is active, pressing Cancel will end the last cycle started.
5.When the cooking time expires, the name of the product that finished along with “DONE” will show on the display. Also, the corresponding LED will flash and the alarm will sound. Open and close the door, or press Cancel to clear the prompt. (If more than one cook cycle is active, the finished product’s LED will flash faster than the other LED’s.)
Shutdown (Auto Cool Down)
•With the oven on, pressing the On/Off button will initiate a shutdown of the oven.
•If the oven temperature is less than 150°F, “OFF” will be displayed for 30 seconds and then the control will go blank.
•If the oven temperature is more than 150°F, auto cool down mode will begin. Open the door slightly, only the fan will run at high speed to cool the oven. “Auto Cool Down” will show on the display.
•If the door is open too much, “Close Door Slightly” will be displayed. Close the door until “Auto Cool Down” is displayed.
•If the door is not open enough, “Open Door Slightly” will be displayed. Open the door until “Auto Cool Down” is displayed.
•Once the oven temperature falls below 150°F, the fan will stop and the oven will display “OFF” for 30 seconds and then turn blank.
Page 8 | Part # 4518084 Rev. 1 (09/04) |
