Magnum 6K32 Managed Switch

Installation and User Guide (02/05)

Magnum

PW

1

3

5

 

 

1

3

5

 

1

3

5

Managed

10/100

 

 

 

LK

10/100

 

 

LK

10/100

 

 

LK

Switch

F/

2

4

 

AC6

F/

2

4

AC

F/

2

4

AC

 

6

 

6

 

10/100

 

 

 

LK

10/100

 

 

LK

10/100

 

 

LK

 

F/H

 

 

 

AC

F/H

 

 

AC

F/H

 

 

AC

Magnum

PW

1

3

5 LK

10/100 1

 

3

5 LK

10/100

1

3

5 LK

10/100

 

Managed

 

 

 

AC6

F/

 

 

AC

F/

 

 

AC

Switch

F/

2

4

2

4

2

4

6

10/100

6

 

10/100

 

 

LK

10/100

 

 

LK

 

 

LK

 

F/H

 

 

AC

F/H

 

 

AC

F/H

 

 

AC

Magnum

PW

1

3

5 LK

10/100 1

 

3

5 LK

10/100

1

3

5 LK

10/100

 

Managed

 

 

 

AC6

F/

 

 

AC

F/

 

 

AC

Switch

F/

2

4

2

4

2

4

6

10/100

6

 

10/100

 

 

LK

10/100

 

 

LK

 

 

LK

 

F/H

 

 

AC

F/H

 

 

AC

F/H

 

 

AC

Magnum

PW

1

3

5

 

 

1

3

5

 

1

3

5

Managed

10/100

 

 

 

LK

10/100

 

 

LK

10/100

 

 

LK

Switch

F/

2

4

 

AC6

F/

2

4

AC

F/

2

4

AC

 

6

 

6

 

10/100

 

 

 

LK

10/100

 

 

LK

10/100

 

 

LK

 

F/H

 

 

 

AC

F/H

 

 

AC

F/H

 

 

AC

Standard Flush 23” Mount Bracket

Mid-Range Mount or 5” Set-Back Bracket

Fig 3.3.1 Mountings for Magnum 6K32 units rack-mounted in a frame

assemblies in rack-mounting frames where the rack-mount equipment is typically accessed in operation from both sides.

The bracket mounting holes in the sides of the Magnum 6K32 permits it to be mounted in various ways. The same holes fit all three types (19”, ETSI, 23”) of brackets. The mounting for the 23” is illustrated in Figure 3.3.1 below. The brackets may be attached flush with the front, or attached in the center for a set-back mounting which may reduce cabling torque.

The optional 23” brackets and the ETSI (21”) brackets each come as a pair in a package, along with the necessary screws for attaching the brackets to the sides of the Magnum Switch unit. They must be ordered as line items.

3.3.2 Rack-mounting, Reverse version of the Magnum 6K32s

The optional Reverse Magnum 6K32 Model has all of the cabling (Ethernet cabling, power cabling and console port cabling) connectors in the rear, and the status LEDs in the front. The status LEDs that are co-incident with the ports are still present there, and a second or dual set of LEDs are used for status visibility in the front of the unit, showing the same data.

There are three options of brackets available to mount in the standard 19” frame or the 23” frame or ETSI (21”) frame. The 19” brackets are included with each unit, the other two may be purchased if desired.

www . GarrettCom . com

24

Page 30
Image 30
GarrettCom Rack-mounting, Reverse version of the Magnum 6K32s, Mountings for Magnum 6K32 units rack-mounted in a frame