GarrettCom manual Securely latching up 6KPM Cards into a Magnum 6K32

Magnum 6K32 Managed Switch Installation and User Guide (02/05)

Step 3. The figure here illustrates the basic layout of an individual PM card. 6KPM card fits into the space provided on the main board over the grand-daughter Bd. and the male latched cream color connector( as shown in above fig. with arrow mark).

Fig 3.5.2d: Daughter Board shown upside down with two male latch connectors

Fig 3.5.2e Daughter Bd. Being placed over the Grand daughter Bd. and the mating connector being matched to lockup properly

Step 4. Hold the daughter board with both hands at the end and align the two cream color latching connectors (male) placed at the bottom of the daughter board with the other female connector placed on the Granddaughter and main board. As shown above in Fig. 3.5.2e

Step 5. Once the latching connectors are aligned properly and the mounting holes are aligned with stand offs then press slowly and firmly with two fingers (as shown

below in Fig. 3.5.2f) on the top of the latching connectors until the connectors latched up securely.

Fig.3.5.2f:

Securely latching up 6KPM Cards into a Magnum 6K32

www . GarrettCom . com

30