GarrettCom 6K32 manual 1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST twist lock Module

Magnum 6K32 Managed Switch Installation and User Guide (02/05)

10/100 LED indicates the speed, if the LED is ON 100Mbps if it is OFF 10Mbps.

5.2.1a 6KP6-RJ10ST, 4@10/100Mbps RJ-45 and 2@10Mb multi-mode FX-ST “twist lock” Combo Module

The 6KP6-RJ10ST is a six port combo module that looks similar to the 100Mb combo module with the exception of 10Mb speed at the ST fiber module. The ST-connector functions as a fiber optic transceiver to support 10BASE-FX network segments. When installed in a Magnum 6K32 Managed Switch, the copper port supports the standard distance 100m on each port and the fiber port supports fiber optic cable distances up the IEEE-standard 10Mbps distance limits, i.e., typically 2km at full-duplex and half-duplex.

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The 10/100 LED indicates the speed, if the LED is ON, 100Mbps if it is OFF, 10Mbps.

5.2.1b 6KP4-F10ST, 4@10Mb multi-mode FX-ST “twist lock” Module

The Magnum 6KP4-F10ST				6KP4-RJ10MST,
is a 10Mb multi-mode		4 Port@ 10Mb ST Fiber Port
fiber module with 4 ST-				2
Fiber ports. All four fiber		ACT			ACT
ports are ST connectors
		F/H			F/H
and configured as 10Mb	3	1	TX	LK RX	5	TX LK RX
		ACT			ACT
Half-duplex by default.		F/H	TX	LK RX	F/H	LK RX
The 10Mb ST-fiber ports		2			6 T
		1		LINK	2	ACTIVITY
allow the user to connect
their legacy 10Mb network		3	FULL/HALF
to the Magnum 6K32

switch. They also provide a convenient way for the half duplex

1

hub to connect to the switch through 10Mb fiber ports. It supports distances according to the 10Base-FL standard i.e, 2Km distance for multi-mode fiber. (Single-mode for 10Km distance may be available as a special order).

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED indicating proper connectivity with the remote device when lit, and FDX/HDX LED indicating full-duplex mode when lit (or half-duplex if off).

www . GarrettCom . com

41