GarrettCom 6K32 manual 6KPM Module Description

Magnum 6K32 Managed Switch Installation and User Guide (02/05)

5.26KPM Module Description

An important feature of the Magnum 6K32 is the use of one Port Modules for flexible mixed-media connectivity to RJ-45 and fiber media in the modular slot. Since the Magnum 6K32 Switches have dual-speed capability for copper ports, the 6 or 8-port interfaces are designed to support all standard Ethernet media types at 10 or 100Mps speed. Each 6K32 PM can provide two, four, six or eight ports for connecting Ethernet segments with its individual connector type and media.

For a list of 6K32 Port Module types, refer to Section 1.2

Each 6K PM is individually described in the following sections.

NOTE: The port #1 on the RJ-45 ports on all the modules, either all RJ-45 ports or used for COMBO module is set as (=) as other ports.

5.2.16KP6-RJMST, 4@10/100Mbps RJ-45 and 2@100Mb multi-mode FX-ST “twist lock” Combo Module

The Magnum 6KP6-RJMST is a combo 6 port module of RJ-45’s at

10/100Mbps and fiber optic ports at 100MB. The Combo module is equipped with dual-

mode ST-type connectors and		6KP6-RJMST,
dual speed copper ports. The
	4 Port@ 10/100Mbps and 2 @100 Mb ST Fiber Port
ST-connector functions as a			2
fiber optic transceiver to		1	3	5	7		1
support 100BASE-FX network		10/100				LK
segments. When installed in a		F/H				ACT
	4	ACT		ACT
Magnum 6K32 Managed		F/H		F/H	TX LK	RX	3
		2 TX	LKRX	6
Switch, the copper port	1	LINK		2	10/100
supports the standard distance	3	ACTIVITY		4	FULL/HALF
100m on each port and the fiber

port supports fiber optic cable distances up the IEEE-standard 100Mbps distance limits, i.e., typically 2km at full-duplex and 412m at half-duplex.

Each port has an Activity (ACT) LED indicating packets being received, a Link (LK) LED that indicates proper connectivity with the remote device when lit, and FDX/HDX LED to indicate full-duplex mode when lit (or half-duplex when off). The

www . GarrettCom . com

40