d Select the SSID of the network to which you want to connect, then click Advanced. The Wireless Network Connection Properties dialog box, which lists available networks and preferred networks, opens.
The list of available networks will change depending on client location. Each network (or access point) that is detected by the client shows up in this list. (“Refresh” updates the list with current information.)
For each network you want to connect to, configure security settings on the client to match the security mode being used by that network.
Note: If the AP is configured to prohibit broadcast of its network name, the name will not show on this list. In that case you would need to type in the exact network name to be able to connect to it.
2 From the list of Available networks select the SSID of the network to which you want to connect, then click Configure. The Wireless Network Connection Properties dialog box opens (with the Association and Authentication tabs for the selected network).
124 | www.gateway.com |